iBase 2.0 + iTendon

O MAIS BAIXO E MAIS LEVE SISTEMA DE BASE DE MASTRO COM PARAFUSO CENTRAL INCLUÍDO. OPÇÃO DE LIBERAÇÃO

Variante:

C99:random

Leia a descrição do produto
iBase 2.0 + iTendon - C99:random
iBase 2.0 + iTendon - C99:random (iBase 2.0 + Joint (long pin))
Nº do item 14220-7315

Nosso objetivo era projetar uma base de mastro que fosse diferente de qualquer outra no mercado e oferecesse recursos realmente exclusivos. Aqui está o resultado:

OPÇÃO DE LIBERAÇÃO

Você sempre se sentiu incomodado por ter que desparafusar a base da prancha após a sessão de surfe com as mãos cansadas, apenas para que a prancha caiba na bolsa. Para esse problema em particular, o iBASE 2.0 apresenta uma útil OPÇÃO DE LIBERAÇÃO para remover a junta de conexão simplesmente puxando o pino em U de aço inoxidável resistente à areia.

Sem a necessidade de ferramentas, você pode até mesmo trocar entre um Powerjoint convencional ou o revolucionário iTENDON em questão de segundos, dependendo de suas preferências.

Uma vantagem adicional desse recurso é que, com uma junta/tendão sobressalente, você estará imediatamente pronto para entrar em ação novamente quando o pior acontecer, sem ter que se esforçar para reparar a junta/tendão.

OPÇÃO PERMA LOCK

Para todas as porcas de segurança, o botão de liberação agora pode ser fixado com um parafuso, inibindo assim a função de liberação.

SOLUÇÃO PARA FURTO

Caso o iBASE 2.0 fique preso à placa após longos períodos de armazenamento, dois orifícios agora permitem que você use uma chave de fenda como alavanca para liberar a base com facilidade.

PERFIL BAIXO

Para que o iBASE 2.0 possa ser instalado ou removido sem a necessidade de ferramentas, decidimos optar por um design de parafuso central. Embora esses designs normalmente sejam construídos relativamente altos, os engenheiros encontraram uma solução para tornar a iBASE 2.0 a base mais baixa de seu tipo - feche a lacuna!

Placa lavadora de 2 fases

A exclusiva placa lavadora é produzida em um processo de sobremoldagem de 2 fases (como uma escova de dentes elétrica)

- O lado superior consiste em um material de PVC de baixa fricção que reduz efetivamente a força necessária para apertar a iBASE 2.0 na prancha

- O lado inferior é moldado com uma mistura especial de borracha para evitar qualquer deslizamento na prancha

Todos esses recursos adicionais não resultam em peso adicional nem sacrificam a durabilidade. É por isso que oferecemos uma GARANTIA ILIMITADA DE 2 ANOS (após o registro on-line) - algo que nenhuma outra base oferece!

LIGHTEST BASE
The lightest base in its class
LOWEST BASE
The lowest base of its kind
RELEASE OPTION
Free choice of 3 different joints + base plate can remain on the board during transportation and storage
STUCK SOLUTION
Lets you unscrew the base with 2 fingers even when its baked with the board
iTENDON
Unique Tendon construction using BASF high-tech material
2 YEAR UNCONDITIONAL WARRANTY
Two years unconditional warranty when registered online
Item
Height (mm)
Total Weight (g)
Melhor tamanho
iBase 2.0 Plate
24
110
Melhor tamanho
+ iTendon
70
260
Melhor tamanho
+ Joint for iBase*
84
310
default
TechFeature

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.

2 PHASE WASHER

The exclusive washer plate is produced in a 2-phase over-moulding process (like an electric toothbrush). - The upper side consists of a low friction PVC material effectively reducing the force necessary to tighten the iBASE 2.0 onto the board - The bottom side is over-moulded using a special rubber-mixture to avoid any sliding on the board

RELEASE OPTION

We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. And: Why do you have to unscrew the joint from the base when changing or replacing the joint? Both annoyances are a thing of the past with the iBASE 2.0. The iBASE features a convenient sand-resistant release option, which allows you to remove the connection joint by simply pulling the stainless steel U-wire. Or for the first time ever have the free choice of different kind of joints.

PERMA LOCK OPTION

For all hardcore freaks the release button can optionally be fixed with a screw now.

JOINT FOR IBASE (INCL. DUOTONE-PIN LONG)

This version features the legendary, slightly softer original PowerJoint durex. Together with the large cross-section this guarantees maximum longevity. Since the built-in DUOTONE pin (M10 thread) has been established as the standard on the market for decades, the joint can directly be used with approx. 90% of all mast extensions on the market. (Note: long pin not compatible with EPX.XT RDM)

iTENDON (INCL. DUOTONE-PIN SHORT)

The most innovative tendon when it comes to performance and safety. Instead of the usual polyurethane material we use a BASF high-tech material for the connecting string, which is about 50% tougher and more durable. Another advantage of this exclusive tendon material is that it avoids the usual offset between rig and board slowing you down. That‘s why the iTENDON is the first choice of many PWA competitors as it offers a more direct power transmission between rig and board than any other tendon out there. Maximum security is granted through the new DYNEEMA.SAFETY.SYSTEM – a highest quality Dyneema kite line that is integrated into the BASF tendon guarantees absolute safety. Extremely lightweight, extremely tear-resistant and absolutely stretch-free. For maximum durability the top and bottom parts are milled out of single V2A stainless steel blocks. Attention: do not use in combination with SURFBENT! Due to the bumper this product creates an over-bend (more than 90°) causing the integrated Dyneema safety rope to cut through the iTENDON.

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

LOW PROFILE

So that the iBASE 2.0 can be installed or removed without the need for tools, it has been designed to include a central screw. Although these designs are normally built relatively high, our engineers have found a solution for making the iBASE 2.0 the lowest base of its kind.

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.

2 PHASE WASHER

The exclusive washer plate is produced in a 2-phase over-moulding process (like an electric toothbrush). - The upper side consists of a low friction PVC material effectively reducing the force necessary to tighten the iBASE 2.0 onto the board - The bottom side is over-moulded using a special rubber-mixture to avoid any sliding on the board

RELEASE OPTION

We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. And: Why do you have to unscrew the joint from the base when changing or replacing the joint? Both annoyances are a thing of the past with the iBASE 2.0. The iBASE features a convenient sand-resistant release option, which allows you to remove the connection joint by simply pulling the stainless steel U-wire. Or for the first time ever have the free choice of different kind of joints.

PERMA LOCK OPTION

For all hardcore freaks the release button can optionally be fixed with a screw now.

JOINT FOR IBASE (INCL. DUOTONE-PIN LONG)

This version features the legendary, slightly softer original PowerJoint durex. Together with the large cross-section this guarantees maximum longevity. Since the built-in DUOTONE pin (M10 thread) has been established as the standard on the market for decades, the joint can directly be used with approx. 90% of all mast extensions on the market. (Note: long pin not compatible with EPX.XT RDM)

iTENDON (INCL. DUOTONE-PIN SHORT)

The most innovative tendon when it comes to performance and safety. Instead of the usual polyurethane material we use a BASF high-tech material for the connecting string, which is about 50% tougher and more durable. Another advantage of this exclusive tendon material is that it avoids the usual offset between rig and board slowing you down. That‘s why the iTENDON is the first choice of many PWA competitors as it offers a more direct power transmission between rig and board than any other tendon out there. Maximum security is granted through the new DYNEEMA.SAFETY.SYSTEM – a highest quality Dyneema kite line that is integrated into the BASF tendon guarantees absolute safety. Extremely lightweight, extremely tear-resistant and absolutely stretch-free. For maximum durability the top and bottom parts are milled out of single V2A stainless steel blocks. Attention: do not use in combination with SURFBENT! Due to the bumper this product creates an over-bend (more than 90°) causing the integrated Dyneema safety rope to cut through the iTENDON.

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

LOW PROFILE

So that the iBASE 2.0 can be installed or removed without the need for tools, it has been designed to include a central screw. Although these designs are normally built relatively high, our engineers have found a solution for making the iBASE 2.0 the lowest base of its kind.

TechFeature
Quote MARCO LANG (PRODUCT MANAGER SAILS)

»SINCE MOST PWA COMPETITORS HAVE REALISED THE ADVANTAGES OF THE IBASE 2.0 EVEN RIDERS FROM OTHER BRANDS STARTED BUYING THIS BASE FROM US INSTEAD OF GETTING A DIFFERENT BASE FOR FREE FROM THEIR SPONSORS.«

— MARCO LANG (PRODUCT MANAGER SAILS)

Opiniões

0 out of 5 stars

/ 5
0 Opiniões

Algum comentário ou pergunta? Aqui você encontrará informações de primeira mão sobre P&D / piloto.

Quanto mais informações você fornecer, mais específico será o conselho/ajuda. Por favor, nos informe:

  • Seu nível de habilidade

  • Seu peso e tamanho corporal

  • Mastro(s) que você planeja usar com a vela

  • Placa(s) que você está usando

  • Condições/locais onde você está navegando.

Por favor, observe: Para ajudar o maior número possível de pessoas a seguir o tópico, o idioma do fórum é apenas inglês.