F_Pace

O MAIS AVANÇADO FOIL RIDING/STYLING SAIL DO MUNDO, CHEIO DE INOVAÇÕES E RECURSOS!

Variante:

C19:black/blue

Leia a descrição do produto
F_Pace - C19:black/blue
F_Pace - C30:blue/berry
Nº do item 14220-1216

O FOILSAILING ESTÁ MAIS POPULAR DO QUE NUNCA E ESTÁ SE DESENVOLVENDO RAPIDAMENTE. ENQUANTO ISSO, ALÉM DO FOILRIDING CLÁSSICO, O FOILSTYLING COMO UMA VARIAÇÃO LÚDICA COM UMA CLARA INCLINAÇÃO PARA O ESTILO LIVRE ESTÁ CAUSANDO MUITA EMPOLGAÇÃO E POSSIBILIDADES ILIMITADAS. AMBOS OS "PLAYGROUNDS" TÊM REQUISITOS ESPECÍFICOS QUE AS VELAS ALETADAS COMUNS NÃO CONSEGUEM ATENDER.

É exatamente por isso que a linha F_PACE, completamente redesenhada, consiste em dois modelos com design diferente, que até o tamanho 5.8 são claramente descritos como F_PACE STYLE, enquanto o 6.4 e o 7.4 são descritos como F_PACE RIDE. No entanto, ambos os modelos têm uma coisa em comum: são dotados de inúmeros recursos de design específicos para o papel alumínio que têm uma influência decisiva no desempenho e resultam em características extraordinárias em seu respectivo espectro. Apenas 4 (STYLE) ou 5 (RIDE) ripas, uma retranca supercurta e uma curva de luff reduzida se combinam para produzir uma vela foil favoravelmente macia e muito leve. O contorno de alto aspecto com superfície superior reduzida corresponde perfeitamente à baixa resistência à água do hidrofólio e às forças laterais quase inexistentes. Com menos movimento na parte superior, a vela permanece estável sobre a prancha, proporcionando o máximo de controle, embora seja muito reativa. O pé fecha perfeitamente com o convés e permite ângulos extremos contra o vento, especialmente no F_PACE RIDE com o foot batten estendido, mas graças ao contorno extremamente côncavo, sem qualquer influência negativa no manuseio! Os novos SLEEVE INDUCERS, adicionados externamente, combinam o melhor dos dois mundos: o rigging super rápido e a rotação de uma vela no-cam combinados com a aerodinâmica otimizada de uma vela cam. Juntamente com o leech apertado, eles permitem que o F_PACE comece a voar mesmo com a menor brisa. Caso seja realmente necessário bombear, a baixa tensão da folha da vela aumenta imediatamente a propulsão e a aceleração efetiva. Especialmente no F_PACE STYLE, a retranca extremamente curta, as 4 ripas giratórias superfáceis e o baixo peso resultam em um manuseio divertido que as manobras e os movimentos difíceis exigem: muita propulsão, peso de giro minimizado e, se necessário, ativação espontânea. Isso o torna também o companheiro ideal para dias mais ventosos.

IDEAL FOR FOIL RIDING/STYLING
Straighter luff curve, short boom and a 4 or 5 batten-layout all result in a soft and super light sail ideal for Foil-Riding/Styling
REDUCED TOP ROACH
Reduced head area increases stability and control as it reduces the movement of the upper sail to correspond to the lower drag of the foil
REDUCED LOOSE LEECH
REDUCED LOOSE LEECH TO CORRESPOND TO THE LOWER DRAG OF THE FOIL
SHORT BOOM >< EXTENDED FOOT-BATTEN
The super short boom greatly improves the handling while the extended foot batten avoids the sail becoming twitchy/unstable when flying
EXPONENTIAL FOOT CONCAVE
The extended foot batten avoids the sail becoming twitchy/unstable when flying while the EXPONENTIAL FOOT CONCAVE avoids a negative influence on the handling
XPLY CORNERS
Crashes while foiling can be tough - therefore we use XPly for all exposed parts of the sail (foot, clew, top)
SLEEVE INDUCER
Best of both worlds: - same rigging speed and rotation like a no-cam sail - same optimized air-flow like a camber inducer
F_Pace - C19:black/blue
Wind Range
EARLY PLANING
Wind Range
STABILITY / V-MAX
Acceleration
INSTANT SPEED
Handling
CONTROL DURING MANOEUVRES
Rec. Skill Level
EASY TO (WATER) START
SIZE
BOOM MAX (CM)
VTS TAIL TENSION
LUFF MAX (CM)
VARIO/FIX TOP
BATTENS
CAMBER
WEIGHT (KG)
MAST TYPE (BEST/ALT.)
MAST GEO (BEST/ALT.)
MAST LENGTH (BEST/ALT.)
*CX = CARBON.XTENDER
Melhor tamanho
4.6 STYLE
154
Min +2 >< Max +4
404
FIX
4
2 SLEEVE INDUCER
2.90
PLATINUM / GOLD>SILVER
RDM/--
370/--
Melhor tamanho
5.2 STYLE
160
Min +2 >< Max +4
438
FIX
4
2 SLEEVE INDUCER
3.15
PLATINUM / GOLD>SILVER
RDM/--
430/--
Melhor tamanho
5.8 STYLE
164
Min +2 >< Max +4
460
FIX
4
2 SLEEVE INDUCER
3.35
PLATINUM / GOLD>SILVER
RDM/--
430/--
Melhor tamanho
6.4 RIDE
180
Min +2 >< Max +4
464
FIX
5
2 SLEEVE INDUCER
4.00
PLATINUM / GOLD>SILVER
RDM/--
460/430
Melhor tamanho
7.4 RIDE
188
Min +2 >< Max +4
494
FIX
5
2 SLEEVE INDUCER
4.40
PLATINUM / GOLD>SILVER
RDM/--
460/430+CX*

ATTENTION: since the mast geometry and length (= stiffness) depend on the sail design, size and luff curve the sails will NOT work with any masts outside the recommendations!

default
Quote MARCO LANG (PRODUCT MANAGER SAILS)

»A FOIL-RIDE/STYLE DREAM COME TRUE: THE SHORTEST BOOM LENGTH OUT THERE (BUT WITHOUT BECOMING TWITCHY) AND JUST 4 RESP. 5 BATTENS GUARANTEE AN UNMATCHED HANDLING. YET THE BRAND NEW SLEEVE INDUCERS RESULT IN A HUGE WIND RANGE BUT WITHOUT ANY INFLUENCE ON HANDLING OR RIGGING.«

— MARCO LANG (PRODUCT MANAGER SAILS)
TechFeature

2+3 YEAR WARRANTY

Guaranteed quality – no other brand offers anything close to it. Keeping weight to a minimum is a great idea. But if necessary reinforcements are reduced too much, the product’s service life will automatically get shorter. DUOTONE has struck the perfect balance between weight and durability. To prove our dedication to ensuring durability and unique quality, almost all of our sails come with a 2+3 year warranty (excluding monofilm). To secure warranty claims fully, please remember to register at www.duotonesports.com straight after your purchase. Otherwise, only statutory warranty claims will be accepted. This is valid only for original owners.

3D Top Cap

Optimised pull. On regular top caps and pin systems the webbing is connected in a “one-dimensional” way with the sail body (either side to side or front to back), which transfers the downhaul tension only in certain points. The 3D TOP CAP allows a “three-dimensional” and very widespread transition of the downhaul forces into the sail body. This eliminates top fluttering and ensures a progressive loose leech extending the wind range. The integrated abrasion ribs eliminate the need for heavy, bulky reinforcements at the end of the luff sleeve.

POLYESTER WEBBING ONLY

Eliminating stretch and loss of tension. If it’s good enough for safety harnesses, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

TT TOP

Improved sail control at higher winds. Designer Kai Hopf originally designed the TT TOP for the WARP. The reduced, concave shape improves tension conditions for a more effective, three-dimensional top twist. This means the top twists not only horizontally, but also vertically under strong winds. By completely neutralising gusts of wind, the rig is kept steady in the rider’s hands, and thus works in a much larger range of winds.

VTS - Visual Trim System

Perfect trim and a huge range of use. You won’t find a quicker or more accurate way of trimming your sail. Even beginners can trim the sail in a matter of seconds to 100% accuracy. All you need to do is pull the luff until the top of the loose leech reaches the “lower wind limit” or “upper wind limit”. The VTS acts as a power boost, ensuring maximum performance and broader range of use.

iROCKET 2.0

Super-lightweight and aerodynamic. An inconspicuous detail with a massive impact. iROCKET 2.0 batten tensioners are super-lightweight, aerodynamic and highly stable, consisting of high-quality components such as a self-lubricating, salt-water-resistant brass nut with stainless-steel screw which can withstand all batten tensions. Furthermore, the iROCKET 2.0 is an essential component for a true windsurfing revolution. 100% correct batten tension, correctly adjusted when purchased and forever after. We calibrate each individual batten at the factory according to development specifications. And we don’t just leave it up to blind intuition either – all battens are adjusted to 100% accuracy using torque wrenches. We also apply soluble screw adhesive to the locknuts so that the tension cannot be altered. This means that the batten tension remains absolutely correct and will never have to be adjusted again. The batten key included with the sail is therefore only needed for fine tuning or in the unlikely event of a batten breakage.

MINI BATTEN

These prevent unwanted leech flutter. Short and highly effective mini-battens which provide support for the areas between the battens and prevent undesirable flutter.

DOUBLE SEAM TECHNOLOGY

Double the durability with half as much stretch. DUOTONE manufactures products of unmatched quality which gives our sails a significantly longer lifetime. A key feature which helps to achieve this is the triple-stitch zig-zag seams. Unlike other products with their single-seam design, these are double-seam. They cover all exposed crash areas, which increases tear resistance and reduces bending-elongation by up to 50%, boosting profile stability and performance.

XPLY PLUS

What would you prefer? Maximum puncture resistance and UV weathering resistance with minimum stretch? Or (theoretically) improved ripstop properties? We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.

XPLY PLUS

What would you prefer? Maximum puncture resistance and UV weathering resistance with minimum stretch? Or (theoretically) improved ripstop properties? We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.

SLEEVE OPENER

Frictionless insertion of the mast into the luff sleeve. An ingenious solution does away with the tedium of inserting the mast. The DUOTONE logo above the boom cutout gently opens the sleeve so that the mast can be threaded with one hand into the luff friction-free, without having to constantly make adjustments to the luff.

INDIVIDUAL BOOM LENGTH INDICATION

The correct boom length without the need for trial and error. Because the boom is attached to the mast at different heights depending on body size, and because this creates a different angle to the mast, the boom length will vary. Specific recommendations for the correct length are printed directly on the luff sleeve at the boom level.

HTS 2.0 HARNESSLINE TRIM SYSTEM

Never position your harness lines incorrectly again. Do away with the tedium of adjusting to the optimum rope position, as well as the numb forearms and the endless fiddling around. The patented print on the sail shows exactly where the centre of the harness line has to be. All you need to do is position the two ends symmetrically at the left and right of the print.

DURATECH FOOT

Long-term guarantee for the sail foot. When starting off on the water or catching up, the foot of the sail is constantly dragged over the nonslip coating, particularly for wide boards. With the exclusive DURATECH FOOT, the seams are completely protected within a large plastic channel so that the surface cannot chafe against seams and material.

SUPER-LIGHT BUMPER incl. VTS slot

The lightest protector on the market. The integrated vinyl viewing window allows to spot the lower edge of the mast. Once the perfect trim has been found, the optional Velcro patch can be used to “save” this position – saving time and ensuring maximum performance.

TWIN STRAP

This keeps the sail rolled up and holds the protector to the mast. A brilliantly simple fastening system which keeps the sail compact and closed after being rolled up and, when on the water, holds the mast protector closely to the mast.

POLYESTER WEBBING ONLY

Eliminating stretch and loss of tension. If it’s good enough for safety harnesses, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

TRIPLE TACK ROLLER 3.0

Find the perfect trim with minimal effort. The integrated, nickel-plated brass triple roller minimises the downhaul forces tremendously.

2+3 YEAR WARRANTY

Guaranteed quality – no other brand offers anything close to it. Keeping weight to a minimum is a great idea. But if necessary reinforcements are reduced too much, the product’s service life will automatically get shorter. DUOTONE has struck the perfect balance between weight and durability. To prove our dedication to ensuring durability and unique quality, almost all of our sails come with a 2+3 year warranty (excluding monofilm). To secure warranty claims fully, please remember to register at www.duotonesports.com straight after your purchase. Otherwise, only statutory warranty claims will be accepted. This is valid only for original owners.

3D Top Cap

Optimised pull. On regular top caps and pin systems the webbing is connected in a “one-dimensional” way with the sail body (either side to side or front to back), which transfers the downhaul tension only in certain points. The 3D TOP CAP allows a “three-dimensional” and very widespread transition of the downhaul forces into the sail body. This eliminates top fluttering and ensures a progressive loose leech extending the wind range. The integrated abrasion ribs eliminate the need for heavy, bulky reinforcements at the end of the luff sleeve.

POLYESTER WEBBING ONLY

Eliminating stretch and loss of tension. If it’s good enough for safety harnesses, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

TT TOP

Improved sail control at higher winds. Designer Kai Hopf originally designed the TT TOP for the WARP. The reduced, concave shape improves tension conditions for a more effective, three-dimensional top twist. This means the top twists not only horizontally, but also vertically under strong winds. By completely neutralising gusts of wind, the rig is kept steady in the rider’s hands, and thus works in a much larger range of winds.

VTS - Visual Trim System

Perfect trim and a huge range of use. You won’t find a quicker or more accurate way of trimming your sail. Even beginners can trim the sail in a matter of seconds to 100% accuracy. All you need to do is pull the luff until the top of the loose leech reaches the “lower wind limit” or “upper wind limit”. The VTS acts as a power boost, ensuring maximum performance and broader range of use.

iROCKET 2.0

Super-lightweight and aerodynamic. An inconspicuous detail with a massive impact. iROCKET 2.0 batten tensioners are super-lightweight, aerodynamic and highly stable, consisting of high-quality components such as a self-lubricating, salt-water-resistant brass nut with stainless-steel screw which can withstand all batten tensions. Furthermore, the iROCKET 2.0 is an essential component for a true windsurfing revolution. 100% correct batten tension, correctly adjusted when purchased and forever after. We calibrate each individual batten at the factory according to development specifications. And we don’t just leave it up to blind intuition either – all battens are adjusted to 100% accuracy using torque wrenches. We also apply soluble screw adhesive to the locknuts so that the tension cannot be altered. This means that the batten tension remains absolutely correct and will never have to be adjusted again. The batten key included with the sail is therefore only needed for fine tuning or in the unlikely event of a batten breakage.

MINI BATTEN

These prevent unwanted leech flutter. Short and highly effective mini-battens which provide support for the areas between the battens and prevent undesirable flutter.

DOUBLE SEAM TECHNOLOGY

Double the durability with half as much stretch. DUOTONE manufactures products of unmatched quality which gives our sails a significantly longer lifetime. A key feature which helps to achieve this is the triple-stitch zig-zag seams. Unlike other products with their single-seam design, these are double-seam. They cover all exposed crash areas, which increases tear resistance and reduces bending-elongation by up to 50%, boosting profile stability and performance.

XPLY PLUS

What would you prefer? Maximum puncture resistance and UV weathering resistance with minimum stretch? Or (theoretically) improved ripstop properties? We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.

XPLY PLUS

What would you prefer? Maximum puncture resistance and UV weathering resistance with minimum stretch? Or (theoretically) improved ripstop properties? We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.

SLEEVE OPENER

Frictionless insertion of the mast into the luff sleeve. An ingenious solution does away with the tedium of inserting the mast. The DUOTONE logo above the boom cutout gently opens the sleeve so that the mast can be threaded with one hand into the luff friction-free, without having to constantly make adjustments to the luff.

INDIVIDUAL BOOM LENGTH INDICATION

The correct boom length without the need for trial and error. Because the boom is attached to the mast at different heights depending on body size, and because this creates a different angle to the mast, the boom length will vary. Specific recommendations for the correct length are printed directly on the luff sleeve at the boom level.

HTS 2.0 HARNESSLINE TRIM SYSTEM

Never position your harness lines incorrectly again. Do away with the tedium of adjusting to the optimum rope position, as well as the numb forearms and the endless fiddling around. The patented print on the sail shows exactly where the centre of the harness line has to be. All you need to do is position the two ends symmetrically at the left and right of the print.

DURATECH FOOT

Long-term guarantee for the sail foot. When starting off on the water or catching up, the foot of the sail is constantly dragged over the nonslip coating, particularly for wide boards. With the exclusive DURATECH FOOT, the seams are completely protected within a large plastic channel so that the surface cannot chafe against seams and material.

SUPER-LIGHT BUMPER incl. VTS slot

The lightest protector on the market. The integrated vinyl viewing window allows to spot the lower edge of the mast. Once the perfect trim has been found, the optional Velcro patch can be used to “save” this position – saving time and ensuring maximum performance.

TWIN STRAP

This keeps the sail rolled up and holds the protector to the mast. A brilliantly simple fastening system which keeps the sail compact and closed after being rolled up and, when on the water, holds the mast protector closely to the mast.

POLYESTER WEBBING ONLY

Eliminating stretch and loss of tension. If it’s good enough for safety harnesses, it’s good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

TRIPLE TACK ROLLER 3.0

Find the perfect trim with minimal effort. The integrated, nickel-plated brass triple roller minimises the downhaul forces tremendously.

TechFeature

Visualização 3D

Opiniões

0 out of 5 stars

/ 5
0 Opiniões

Algum comentário ou pergunta? Aqui você encontrará informações de primeira mão sobre P&D / piloto.

Quanto mais informações você fornecer, mais específico será o conselho/ajuda. Por favor, nos informe:

  • Seu nível de habilidade

  • Seu peso e tamanho corporal

  • Modelo(s) e tamanho(s) de pipa que você está usando.

  • Barra e comprimento da linha que você está usando

  • Placa(s) que você está usando

  • Condições/locais onde você está praticando kitesurf.

  • Qual é a pergunta específica que você tem?