Trust Bar Quad Control

The new pigtails have reduced sleeving to only where it is needed. This reduces the weight and the drag through the air at a critical connection point to the kite.

The new V-Distributor III can be adjusted easily, allowing you to set the front line to split quickly. It can also be removed entirely, very easily, so you can have a very low V. This makes the Click Bar and Trust Bar compatible with most kites on the market.

The new Iron Heart VI features a simple Click-In Safety System including an optical control function that allows you to reconnect the chicken loop as easily as you clip in your seat belt plus being able to check the green marking, to ensure the system is closed properly. Due to a ball bearing the Click Bar has an automatic untwist function.

The exchangeable insert for the centre hole is made of plastic to minimize wear on the depower line. The material we use is resistant to abrasion, and will cause much less damage, if sand is present, to the line itself.

The moulded EVA floater is fully integrated into the winding posts to offer a seamless connection, which gives better protection to the lines and the rider. The integration of the EVA floater also avoids line tangling and gives better overall stiffness between the bar and lines. To achieve better and more direct feedback on the thumb, we added a push pin on the outside of the winding post for easy operation. The Flip-Flop function allows you to switch between a 42 cm and 49 cm bar width (S / M bar) with just one click. This makes the procedure of changing the bar set up far simpler.

A small diameter of the bar allows a very thick EVA bar grip. This offers ideal control and comfort.

The Roto Head permits you to untangle the lines after a rotational jump or a kiteloop while you are riding. It is made from an extremely durable plastic construction where no corrosion is possible. The Roto Head comes with two grub screws making it easy and fast to change the depower line. Simply use an FCS fin key to remove the screws and change the depower line.

Twists the front lines by 90° and allows an optional low V setup.

The Winding Posts are made of a fully moulded fibreglass reinforced Polyamide construction, which offers an incredibly lightweight solution with increased stiffness. In addition to this, there is a moulded EVA cushioning to ensure maximum comfort for the rider. The Winding Posts feature an integrated backline adjustment, which allows the rider to trim the rear lines when needed. ATTENTION: Never ride without the cover. It prevents the knot of the leader line from slipping out of its housing.