iBase 2.0 - plate only - Unicolor - 24mm
iBase 2.0 - plate only - Unicolor - 24mm

iBase 2.0 - plate only

THE LOWEST AND LIGHTEST MAST BASE SYSTEM WITH CENTRAL SCREW INCL. RELEASE OPTION

Variant:

Unicolor

iBase 2.0 - plate only - Unicolor
iBase 2.0 - plate only - 150g (iTendon for iBase)
iBase 2.0 - plate only - 200g (Joint (long pin) for iBase)
Find a Dealer
Item-no. 14220-7318
  • Action Shot
  • Action Shot
  • Action Shot
  • Action Shot

Our aim was to design a mast base which is unlike anything else on the market and offers real unique features. Here is the outcome:

Our aim was to design a mast base which is unlike anything else on the market and offers real unique features. Here is the outcome:


RELEASE OPTION

Have you always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. For this problem in particular the iBASE 2.0 features a useful RELEASE OPTION for removing the connection joint by simply pulling the sand-resistant, stainless-steel U-pin.

Without the need for tools, you can even swap between a conventional Powerjoint or our revolutionary iTENDON in a matter of seconds depending on your preferences.

An additional advantage of this feature is that with a spare joint/tendon you are immediately ready for action again when worst comes to worst – without having to go through the effort of repairing the joint/tendon.


PERMA LOCK OPTION

For all safety nuts, the release button can now be fixed with a screw thus inhibiting the release function.


STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, two holes now allow you to use a screwdriver as a lever to release the base with ease.


LOW PROFILE

So that the iBASE 2.0 can be installed or removed without the need for tools, we have decided to go for a central screw design. Although these designs are normally built relatively high, our engineers have found a solution for making the iBASE 2.0 the lowest base of its kind - close the gap!


2 PHASE WASHER PLATE

The exclusive washer plate is produced in a 2-phase over-moulding process (like an electric toothbrush)

- The upper side consists of a low friction PVC material effectively reducing the force necessary to tighten the iBASE 2.0 onto the board

- The bottom side is over-moulded using a special rubber-mixture to avoid any sliding on the board


All these additional features do not lead to any additional weight or sacrifice in durability. That's why we offer a 2 YEAR UNLIMITED WARRANTY (after online registration) – something no other bases offer!

LIGHTEST BASE
The lightest base in its class
LOWEST BASE
The lowest base of its kind
RELEASE OPTION
Free choice of 3 different joints + base plate can remain on the board during transportation and storage
PERMA LOCK OPTION
Hardcore freaks can lock the release lever
STUCK SOLUTION
Lets you unscrew the base with 2 fingers even when its baked with the board
iTENDON
Unique Tendon construction using BASF high-tech material
INTEGRATED DYNEEMA
Tendon incl. integrated Dyneema safety line
2 YEAR UNCONDITIONAL WARRANTY
Two years unconditional warranty when registered online
Item
Height (mm)
Total Weight (g)
Best Size
iBase 2.0 Plate
24
110
Best Size
+ iTendon
70
260
Best Size
+iTendon Shox
72
210
Best Size
+ Joint for iBase*
84
310
default
TechFeature

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.

2 PHASE WASHER

The exclusive washer plate is produced in a 2-phase over-moulding process (like an electric toothbrush). - The upper side consists of a low friction PVC material effectively reducing the force necessary to tighten the iBASE 2.0 onto the board - The bottom side is over-moulded using a special rubber-mixture to avoid any sliding on the board

RELEASE OPTION

We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. And: Why do you have to unscrew the joint from the base when changing or replacing the joint? Both annoyances are a thing of the past with the iBASE 2.0. The iBASE features a convenient sand-resistant release option, which allows you to remove the connection joint by simply pulling the stainless steel U-wire. Or for the first time ever have the free choice of different kind of joints.

PERMA LOCK OPTION

For all hardcore freaks the release button can optionally be fixed with a screw now.

JOINT FOR IBASE (INCL. DUOTONE-PIN LONG)

This version features the legendary, slightly softer original PowerJoint durex. Together with the large cross-section this guarantees maximum longevity. Since the built-in DUOTONE pin (M10 thread) has been established as the standard on the market for decades, the joint can directly be used with approx. 90% of all mast extensions on the market. (Note: long pin not compatible with EPX.XT RDM)

iTENDON (INCL. DUOTONE-PIN SHORT)

The most innovative tendon when it comes to performance and safety. Instead of the usual polyurethane material we use a BASF high-tech material for the connecting string, which is about 50% tougher and more durable. Another advantage of this exclusive tendon material is that it avoids the usual offset between rig and board slowing you down. That‘s why the iTENDON is the first choice of many PWA competitors as it offers a more direct power transmission between rig and board than any other tendon out there. Maximum security is granted through the new DYNEEMA.SAFETY.SYSTEM – a highest quality Dyneema kite line that is integrated into the BASF tendon guarantees absolute safety. Extremely lightweight, extremely tear-resistant and absolutely stretch-free. For maximum durability the top and bottom parts are milled out of single V2A stainless steel blocks. Attention: do not use in combination with SURFBENT! Due to the bumper this product creates an over-bend (more than 90°) causing the integrated Dyneema safety rope to cut through the iTENDON.

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.

2 PHASE WASHER

The exclusive washer plate is produced in a 2-phase over-moulding process (like an electric toothbrush). - The upper side consists of a low friction PVC material effectively reducing the force necessary to tighten the iBASE 2.0 onto the board - The bottom side is over-moulded using a special rubber-mixture to avoid any sliding on the board

RELEASE OPTION

We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. And: Why do you have to unscrew the joint from the base when changing or replacing the joint? Both annoyances are a thing of the past with the iBASE 2.0. The iBASE features a convenient sand-resistant release option, which allows you to remove the connection joint by simply pulling the stainless steel U-wire. Or for the first time ever have the free choice of different kind of joints.

PERMA LOCK OPTION

For all hardcore freaks the release button can optionally be fixed with a screw now.

JOINT FOR IBASE (INCL. DUOTONE-PIN LONG)

This version features the legendary, slightly softer original PowerJoint durex. Together with the large cross-section this guarantees maximum longevity. Since the built-in DUOTONE pin (M10 thread) has been established as the standard on the market for decades, the joint can directly be used with approx. 90% of all mast extensions on the market. (Note: long pin not compatible with EPX.XT RDM)

iTENDON (INCL. DUOTONE-PIN SHORT)

The most innovative tendon when it comes to performance and safety. Instead of the usual polyurethane material we use a BASF high-tech material for the connecting string, which is about 50% tougher and more durable. Another advantage of this exclusive tendon material is that it avoids the usual offset between rig and board slowing you down. That‘s why the iTENDON is the first choice of many PWA competitors as it offers a more direct power transmission between rig and board than any other tendon out there. Maximum security is granted through the new DYNEEMA.SAFETY.SYSTEM – a highest quality Dyneema kite line that is integrated into the BASF tendon guarantees absolute safety. Extremely lightweight, extremely tear-resistant and absolutely stretch-free. For maximum durability the top and bottom parts are milled out of single V2A stainless steel blocks. Attention: do not use in combination with SURFBENT! Due to the bumper this product creates an over-bend (more than 90°) causing the integrated Dyneema safety rope to cut through the iTENDON.

2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability. Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Because despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

STUCK SOLUTION

Should the iBASE 2.0 ever become stuck to the board after long storage times, now two holes allow using a screwdriver as a lever to release the base.
TechFeature