DUOTONE HARDWARE 1920x640 Teaser-PDS SS20 Boom Silver Series 11
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
SILVER SERIES
3D

SILVER SERIES

Art.-No. 14200-1401

THE LIGHTEST AND MOST ADVANCED BOOM IN ITS CLASS

SILVER SERIES
SILVER SERIES

KEY FEATURES

SILVER SERIES

High Tech Alu

The most high-tech aluminum boom to-date featuring 7075 high-tech aluminum

OVAL TAIL-SECTION

Increases boom stiffness by 30% (patent pending)

PREMIUM MATERIAL

7075 aluminum with PROTECTION GRIP

FRONT-END

iFRONT 2.0 - The lightest Front-End on earth

TAIL-END

INSIDE TAIL with iTAIL WAVE FITTING

2 Year Warranty

Duotone is giving 2 year full unconditional warranty, even including bending, when registered online

DETAILS

SILVER SERIES

All SILVER booms are made from 7075 high-tech aluminium in high-quality BONDED TECHNOLOGY. This material used predominantly in cycling gives the tubes significantly more stiffness. There is also the new combination of a round tube in the front area (holding forces act obliquely downwards, so it is stiffer around here) and the OVAL TAIL SECTION (horizontal sail pull, thus the oval tube is stiffer here). This makes the entire SILVER around 30% stiffer. Together with the hardened front arch, this results in enormous hardness and durability. We are even prepared to offer a two-year unlimited warranty on all SILVER models – even for bending!

The wave-oriented SILVER models consist of three segments and have a one-piece aluminium rear arch in addition to the intelligent iFRONT 2.0 front end. Together with the RDM tubes at 28 mm, this creates the ideal combination of stiffness and comfort. The bend curve applies an even pull on the mast- and backhand. The lengths 180 and 200 cm with performance bend curve are specifically for freeride sails and a 30 mm tube diameter to ensure maximum stiffness.

The entire SILVER line is equipped with the iTAIL WAVE tail end, whose patented Loop-Loop-Go 2.0 system for the first time guarantees absolutely perfect rope alignment. The solid PROTECTION GRIP coating on the outside effectively prevents damage to the coating when rigging up.

Boom Basics

Bend Curve: New-School/Wave vs. Classic/Race
  1. NEW-SCHOOL/WAVE CURVE
    On New School shaped booms the curve is concentrated in the first 25-30 cm while the rest of the boom is straight. This means that you don’t need to twist/bent your front hand even on smaller (wave) sails as it's still positioned within the straight part.
     
  2. CLASSIC/RACE CURVE
    Classic shaped booms have a curve ranging further back to approx. 45cm. On smaller (wave) sails this means that the front hand is twisted/bent resulting in increased fatigue or even hand-wrist pain.
    The larger the sail though the more the draft (and with it your hands) moves back so that the front hand isn't twisted anymore.
    Bigger sails also have a deeper profile. Classic shaped booms with their curve ranging further back make the boom become wider in the middle avoiding the sail touching the boom.
    Therefore classic shaped booms are still the first choice for larger sized freeride/slalom sails (6.5 and up).
Bend Curve: New-School/Wave vs. Classic/Race
Material: Carbon vs. Aluminium

Carbon booms are 3 to 5 times more expensive than aluminium booms. The reasons for this drastic price difference are the massive difference in the raw material prices and the fact that a carbon boom is 100% custom/hand made. 

Since carbon is a much stiffer raw material than aluminium carbon booms offer 4 essential advantages:

  1. When a gust hits your sail you need to pull hard to avoid loosing control. A softer boom bends more the harder you pull. This sideway bend results in the boom to become shorter. When the boom gets shorter the sail becomes fuller/baggy = loss of control.
    The longer the boom (180 and up) the more obvious the difference in stiffness becomes.
     
  2. Carbon booms can be made much lighter (up to 20%) while still offering at least 20% higher stiffness. 
     
  3. With carbon you can go for thinner diameters (up to 4 mm) while still offering at least 20% higher stiffness. In general the thinner the tube diameter the more comfortable it becomes to hold on to. This becomes very obvious once you go back from a thin diameter to a thicker one. 
     
  4. Carbon does not bend. Therefore a carbon boom usually lasts 3-4 times as long as an aluminium boom because any overload (crash, catapult, ..) will eventually result in a bent boom.
    Also due to the fact that carbon doesn't corrode a carbon boom requires much less care than an aluminium one. Check the condition of the ropes once in a while and worst case get the grip replaced and a carbon boom will last for years to come. 
Can I really use the complete length range of the boom?

Under usual conditions yes. But for super heavy usage you need to differentiate between carbon- and aluminium booms.

  • The worst case scenario on a carbon boom is a breakage when massively overloaded. Carbon booms do not bend though. Therefore carbon booms can be used without any limitations even when fully extended. 
     
  • Aluminium though can break and bend. Therefore a heavy rider and/or overloading (e.g. wipe-outs/catapults or landing super high jumps) might cause an alloy boom to bend when fully extended. As a guideline for really heavy (ab)use do not use the last 15-20 cm of the boom range. 

TECH SPECS

SILVER SERIES

LENGTH (CM)
BEND CURVE
WEIGHT (KG)
DIAMETER (MM)
MATERIAL
ADAPTER INCL.
TAIL-END
140-190150-200160-220180-230200-250
NEW SCHOOLNEW SCHOOLHYBRIDPERFORMANCEPERFORMANCE
2.352.452.552.752.95
27.527.527.529.529.5
7075 ALUMINUM7075 ALUMINUM7075 ALUMINUM7075 ALUMINUM7075 ALUMINUM
RDMRDMRDM+SDMSDMSDM
INSIDE TAIL with iTAIL
WAVE FITTING
INSIDE TAIL with iTAIL
WAVE FITTING
INSIDE TAIL with iTAIL
WAVE FITTING
INSIDE TAIL with iTAIL
WAVE FITTING
INSIDE TAIL with iTAIL
WAVE FITTING

Tips & Tricks

EVA grip doesn't like sun cream

You should always try to avoid getting sun cream onto your EVA grip. Not only can sun cream contaminate especially the lighter EVA colors. But more so the grip gets very slippery thus you need to grip harder which is very exhausting. Most important though is once sun cream gets onto the EVA the grip becomes slippery forever. 

There are 2 simple solutions to avoid getting sun cream onto your EVA grip:

  1. After applying sun cream wait until it's fully soacked into your skin which takes at least 10-15 minutes. Since we all wanna get onto the water asap this isn't very practical though. 
     
  2. Free your hands from sun cream either with alcohol (quite unpractical) or by using sand to "wash" your hands. 
"Beauty care"
  1. Even for storage or transport please always make sure to close the length adjustment lock system. In the open position the snap part is fully stretched out and therefore might loose a bit of its snapping function after a while. 
     
  2. Over time even stainless steel and aluminium parts get affected by salt water.
    Therefore after holidays in salt water please remove the tail-end and rinse it as well as the inside of the boom body with fresh water.
    For winter storage make sure to remove the tail-end from the body. 
     
  3. Please make sure to regularly check the condition of the ropes (front- and tail-end). Over time the rope surface might get damaged through the clamping in the metal cleat. When you start seeing the white core it's time to replace the rope. 
     
  4. The EVA grip is very cozy on your hands but it doesn't like sharp objects. Therefore don't rig up on concrete but try to rig on a soft ground (e.g. sand or gras). 
    Little cuts in the EVA you need to "ignore".
    Little parts peeling off can easily be repaired using super glue.
    In case the grip needs to be replaced (cause it's halfway gone or cause you cannot stand it destroying the beauty of your boom:-) do not try to do this on your own. It's a very delicate and time-consuming procedure which you should leave to professionals. 
     
  5. Need any spare parts? Here you go
Correct tension when snapping the front-end onto the mast

In general most people do not use enough tension here resulting in the boom to slowly slide down during heavy sailing. When designing the front-end lever we made sure that you cannot break the mast while snapping on the front-end.

Exchange the "cheap" iFront 2.0 rope

We use a rather "cheap" Polyester rope here by purpose. Compared to Dyneema/Spectra rope Polyester has a certain elasticity. This tiny bit of stretch buffers peak loads (e.g. during massive crashes or landing high jumps) thus preventing overload and a possible breakage of the plastic parts. 

TECH FEATURES

SILVER SERIES

iFront 2.0
iFront 2.0iFront 2.0

THE LIGHTEST FRONT-END ON EARTH! 

It doesn’t just look slimmer and smoother, the iFRONT 2.0 is also a whopping 35% lighter than its predecessor! With 345 grams it is the lightest front-end on the market!
For the first time the construction of the iFRONT 2.0 combines the advantages of both all front-ends in one:

A Vertical stiffness:
Unlike other front-ends we use 50% longer stainless steel axle-bolts which are directly connected to the side walls. Thus we obtain a maximum vertical/torsion stiffness, which results in an extremely direct connection/transmission of boom to mast (= maximum performance).

B Horizontal flexibility:
The partially recessed center of the collar gives the iFRONT 2.0 a kind of hinge function, so that the collar fits to any mast diameter without any gap (= very smooth on the mast and extremely slip resistant). We know of no other front-end that fits so smoothly around the mast and thus effectively protects the mast.

This exceptional fit is guaranteed on SDM as well as RDM masts as the iFRONT 2.0 can easily be adapted through the exchange of 2 different friction pads.

iFront 2.0
iFront 2.0iFront 2.0

THE LIGHTEST FRONT-END ON EARTH! 

It doesn’t just look slimmer and smoother, the iFRONT 2.0 is also a whopping 35% lighter than its predecessor! With 345 grams it is the lightest front-end on the market!
For the first time the construction of the iFRONT 2.0 combines the advantages of both all front-ends in one:

A Vertical stiffness:
Unlike other front-ends we use 50% longer stainless steel axle-bolts which are directly connected to the side walls. Thus we obtain a maximum vertical/torsion stiffness, which results in an extremely direct connection/transmission of boom to mast (= maximum performance).

B Horizontal flexibility:
The partially recessed center of the collar gives the iFRONT 2.0 a kind of hinge function, so that the collar fits to any mast diameter without any gap (= very smooth on the mast and extremely slip resistant). We know of no other front-end that fits so smoothly around the mast and thus effectively protects the mast.

This exceptional fit is guaranteed on SDM as well as RDM masts as the iFRONT 2.0 can easily be adapted through the exchange of 2 different friction pads.

iFront 2.0
iFront 2.0iFront 2.0

THE LIGHTEST FRONT-END ON EARTH! 

It doesn’t just look slimmer and smoother, the iFRONT 2.0 is also a whopping 35% lighter than its predecessor! With 345 grams it is the lightest front-end on the market!
For the first time the construction of the iFRONT 2.0 combines the advantages of both all front-ends in one:

A Vertical stiffness:
Unlike other front-ends we use 50% longer stainless steel axle-bolts which are directly connected to the side walls. Thus we obtain a maximum vertical/torsion stiffness, which results in an extremely direct connection/transmission of boom to mast (= maximum performance).

B Horizontal flexibility:
The partially recessed center of the collar gives the iFRONT 2.0 a kind of hinge function, so that the collar fits to any mast diameter without any gap (= very smooth on the mast and extremely slip resistant). We know of no other front-end that fits so smoothly around the mast and thus effectively protects the mast.

This exceptional fit is guaranteed on SDM as well as RDM masts as the iFRONT 2.0 can easily be adapted through the exchange of 2 different friction pads.

Protection Grip Insert
Protection Grip InsertProtection Grip Insert

MORE RESISTANT! The high-density EVA grip insert at the outside guarantes maximum abrasion resistance during rigging.

Protection Grip Insert
Protection Grip InsertProtection Grip Insert

MORE RESISTANT! The high-density EVA grip insert at the outside guarantes maximum abrasion resistance during rigging.

Protection Grip Insert
Protection Grip InsertProtection Grip Insert

MORE RESISTANT! The high-density EVA grip insert at the outside guarantes maximum abrasion resistance during rigging.

Wide Wave Tail Geometry
Wide Wave Tail GeometryWide Wave Tail Geometry

EQUAL LOAD ON BOTH HANDS AND IMPROVED HANDLING! Also the short booms now feature a 4 cm wider tail-end moving your back-hand further away from the sail. For the first time now your back- and front-hand are equally angled making sailing less fatigue. You immediately realize this much more relaxed sailing position no matter if going in a straight line or down the line on a wave. The second advantage is a much improved handling during ducking maneuvers.

Wide Wave Tail Geometry
Wide Wave Tail GeometryWide Wave Tail Geometry

EQUAL LOAD ON BOTH HANDS AND IMPROVED HANDLING! Also the short booms now feature a 4 cm wider tail-end moving your back-hand further away from the sail. For the first time now your back- and front-hand are equally angled making sailing less fatigue. You immediately realize this much more relaxed sailing position no matter if going in a straight line or down the line on a wave. The second advantage is a much improved handling during ducking maneuvers.

iTail Wave Fitting
iTail Wave FittingiTail Wave Fitting

FRICTIONLESS ALIGNMENT PLUS EXCESS ROPE STORAGE! 

The iTAIL.WAVE fitting offers 2 revolutionary details:

A The patented LOOP.LOOP.GO 2.0 function guarantees an ideal 100% frictionless alignment of the rope!

B Instead of tying the excess rope around the tube you just wrap it around the integrated “bridge” at the bottom side – the cleanest and fastest solution ever!

iTail Wave Fitting
iTail Wave FittingiTail Wave Fitting

FRICTIONLESS ALIGNMENT PLUS EXCESS ROPE STORAGE! 

The iTAIL.WAVE fitting offers 2 revolutionary details:

A The patented LOOP.LOOP.GO 2.0 function guarantees an ideal 100% frictionless alignment of the rope!

B Instead of tying the excess rope around the tube you just wrap it around the integrated “bridge” at the bottom side – the cleanest and fastest solution ever!

External Tail Fittings
External Tail FittingsExternal Tail Fittings

MINIMUM WEIGHT AND UNMATCHED FEATURES! Especially on carbon booms most brands integrate the fittings into the tail-end to generate a clean look. We prefer external fittings to achieve 3 crucial advantages:

  1. Much lower weight
  2. Features and functions which no other brand can offer (see iTAIL.RACE.FITTING and iTAIL.WAVE.FITTING)
  3. If need be super easy to exchange
2 YEAR UNCONDITIONAL WARRANTY
2 YEAR UNCONDITIONAL WARRANTY2 YEAR UNCONDITIONAL WARRANTY

Light is right but only if it doesn't go to costs of durability.
Durability as part of the DUOTONE quality has always been one of the defining characteristics of our products - and it stays that way. Becuase despite offering the lightest components on the market we hold firmly to the course of our tried and true quality claim. This is ensured by sophisticted engineering, highest quality and more effectively used raw materials combined with the latest processing technologies. 
The legendary DUOTONE longevity is therefore retained completely, which we guarantee for your with an industry-leading 2 YEAR UNCONDITIONAL WARRANTY!

iTail Wave Fitting
iTail Wave FittingiTail Wave Fitting

FRICTIONLESS ALIGNMENT PLUS EXCESS ROPE STORAGE! 

The iTAIL.WAVE fitting offers 2 revolutionary details:

A The patented LOOP.LOOP.GO 2.0 function guarantees an ideal 100% frictionless alignment of the rope!

B Instead of tying the excess rope around the tube you just wrap it around the integrated “bridge” at the bottom side – the cleanest and fastest solution ever!

WANNA MAKE IT UNCONDITIONAL?

TO SECURE THE EXTENDED CLAIMS PLEASE REGISTER WITHIN 30 DAYS.
OTHERWISE JUST THE LEGAL WARRANTY PERIOD CAN BE GRANTED!

REGISTER NOW

GALLERY

SILVER SERIES